10 Things to Consider When Buying SS Saddle Clamp

Track Joint Assembly One required for each track section per run, less one FC-CH1D - Joint Clamp for secure attachment and proper alignment of track sections. Includes all hardware. FC-CH1D-SS - Stainless Joint Clamp for secure attachment and proper
alignment of track sections. Includes all stainless steel hardware. FC-CH1DW - Welding sleeve for joining track sections. FC-CH1DW-SS - Stainless Welding sleeve for joining track sections. Track Hanger Clamp Assembly One required for each cross arm support bracket for each track run.
5 foot spacing. FC-CH1F- Galvanized - For mounting track to cross arm support bracket.
Includes all required hardware. FC-CH1F-SS - Stainless - For mounting track to cross arm support
bracket. Includes all required stainless hardware. FC-CH1FK - Galvanized Low profile track hanger assembly. Single Bolt Track Hanger & Anchor Assembly One required for each cross arm support bracket for each track run.
5 foot spacing. FC-CH1F-1 - Single mounting bolt track hanger assembly. FC-CH1F-1-A - Single mounting bolt track anchor assembly with anchor. FC-CH1F-1-R - Single mounting bolt track hanger w/Rect. Nut. FC-CH1F-1-A-R - Single mounting bolt track anchor w/Rect. Nut. The FC-CH1F-1 track hanger assembly is designed to be mounted on angle iron
brackets with one mounting hole. The use of one FCCH1F-1-A track anchor per
track run, which also mounts in one mounting hole, will prevent the track from
sliding out of position. The rectangle nut hangers and anchors are used with
cross arm brackets. End Stop One required for each track run. FC-CH1G - Bumper with galvanized mounting hardware. FC-CH1G-SS - Bumper with stainless mounting hardware. Mounting Clamp for Cross Arm Support Two required for each cross arm support bracket. FC-TMC-U - Galvanized universal mounting clamp with hardware. FC-TMC-U-SS - Stainless universal mounting clamp with stainless hardware. Rubber End Cap FC-CH1GC - Rubber end cap Tow Trolley and Saddle Assembly One required for each piece of moving equipment to be electrified. NOTE: Load Rating is 45 lb. max. Precision Bearings Available - Consult Factory FC-TRT1 - Steel trolley and standard saddle with cut-out box for tow bar
(FC-TB1). FC-TRT1-SS - Same as FC-TRT1 except with stainless steel trolley,
cut-out box and wheels. FC-TRT1-BR - Same as FC-TRT1 except with stainless steel trolley and
cut-out box with brass wheels. Tow Bar One required for each tow trolley. FC-TB1 - For mounting on moving equipment - 18" long - Galvanized. FC-TB1-SS - For mounting on moving equipment - 18" long - Stainless. Control Box Trolley (optional brake available) NOTE: Control Box Not Included Precision Bearings Available - Consult Factory. FC-TRC1 - Two trolleys and one standard saddle mounted on bracket,
plus fittings to attach control box. FC-TRC1-SS - Same as FC-TRC1 except with stainless steel trolleys and
stainless steel wheels. FC-TRC1-BR - Same as FC-TRC1 except with brass wheels. Junction Boxes and Terminal Strips Junction box for Control Box Trolley (FC-TRC1) Accepts up to
2 terminal strips. All box dimensions are 8" x 10" x 4" with panel. FC-BX1 - Steel junction box - Rated NEMA 12 FC-BX1-SS - Stainless Steel junction box - Rated NEMA 4X FC-BX1-4X - Fiberglass junction box - Rated NEMA 4X FC-BXT - Standard 12-pole terminal strip. FC-BXT-12-50 - Heavy-duty 50 Amp DIN type 12-terminal. Standard Duty Intermediate Trolley - Saddle Assemblies NOTE: Load Rating is 45 lb. max. Precision Bearings and 2-Tiered Trolleys Available - Consult Factory. FC-TR1 - 5-inch trolley with 4 steel shielded ball bearing wheels, cable
clamp pad standard saddle and hardware. FC-TR1-SS - Same as FC-TR1 except with stainless steel trolley, wheels,
and hardware. FC-TR1-BR - Same as FC-TR1 except with stainless steel trolley and
hardware, with brass wheels. Track Joint Assembly One required for each track section per run, less one. FC-AR required. FC-CH2D - Joint Clamp for secure attachment and proper alignment of
track sections. Includes all hardware FC-CH2D-SS - Stainless Joint Clamp for secure attachment and proper
alignment of track sections. Includes all stainless steel hardware. Track Hanger Clamp Assembly One required for each cross arm support bracket for each track run.
10 foot spacing under 75 lb. trolley load. For heavier loads, see chart
in C-Track Technical Bulletin. Use wrench FC-AR. FC-CH2F - Galvanized - For mounting track to cross arm support bracket. Includes all required hardware. S FC-CH2F-SS - Stainless - For mounting track to cross arm support bracket. Includes all required stainless hardware. End Stop One required for each track run. FC-CH2G - Bumper with galvanized mounting hardware. FC-CH2G-SS - Bumper with stainless mounting hardware. Mounting Clamp for Cross Arm Bracket FC-TMC-U - Universal mounting clamp with hardware. FC-TMC-U-SS - Stainless universal mounting clamp with stainless
hardware. Rubber End Cap FC-CH2GC - Flexible PVC End Clamp and Saddle Assembly One required for each track run at storage end of track. FC-CS22 - Standard saddle with clamp and hardware. FC-CS22-SS - Same as FC-CS22 except stainless steel clamp and hardware. FC-CS21 - Same as FC-CS22 except with large saddle. FC-CS21-SS - Same as FC-CS22 except stainless steel clamp and hardware. FC-CS24 - Same as the FC-CS21 except 5-1/2" x 4-1/8" and large saddle. FC-CS24-SS - Same as FC-CS24 except stainless steel clamp and hardware. Tow Trolley and Saddle Assembly One required for each piece of moving equipment to be electrified. NOTE: Load Rating: 75 lb. max FC-TRT22 - 5" trolley with four steel shielded ball bearing wheels and
standard saddle with cut out box for tow bar.
Stainless version has anodized body. FC-TRT22-SS - 5" trolley with four steel shielded ball bearing wheels and
standard saddle with cut out box for tow bar.
Stainless version has anodized body. FC-TRT21- 7"L x 6-3/4"W, trolley and large saddle. FC-TRT21-SS - 7"L x 6-3/4"W, trolley and large saddle. FC-TRT24- Same as the FC-TRT21 except 5-1/2" wide.
4-1/8" x 2" cable window FC-TRT24-SS - Same as the FC-TRT21 except 5-1/2" wide.
4-1/8" x 2" cable window Tow Bar One required for each tow trolley. FC-TB1 - For mounting on moving equipment - 18" long - Galvanized. FC-TB1-SS - For mounting moving equipment - 18" long - Stainless. Control Box Trolley (optional brake available) NOTE: Control Box Not Inlcuded Precision Bearings Available - Consult Factory. FC-TRC22 - Two trolleys and one standard saddle mounted on
bracket, plus fittings to attach control box. FC-TRC22-SS - Same as FC-TRC22 except with anodized trolley
body and stainless hardware. Junction Boxes and Terminal Strips Junction box for Control Box Trolley (FC-TRC22) Accepts up to
2 terminal strips. All box dimensions are 8" x 10" x 4" with panel. FC-BX1 - Steel junction box - Rated NEMA 12 FC-BX1-SS - Stainless Steel junction box - Rated NEMA 4X FC-BX1-4X - Fiberglass junction box - Rated NEMA 4X FC-BX2 -Steel junction box, 10" x 12" x 5", for control trolley. Rated
NEMA 13. Specify 3 or 4 FC-BXT or FC-BXT-HD terminal strips. FC-BXT - Standard 12-pole terminal strip. FC-BXT-12-50 - Heavy-duty 50 Amp DIN type 12-terminal.