5 Things to Know Before Buying Sliding Bearing

When you’re putting together drawings for new construction projects such as supermarkets, car parks and schools, slide bearings should be part of your specification.

For more information, please visit Beijing SKF.

There’s a lot more to slide bearings than you may think though. And often, the detail of the configuration required isn’t included in the plans that are used by construction companies on-site.

What slide bearings do

In larger construction projects, PTFE slide bearings are used to carry large loads and movements. This could be in a football stadium, multi-story car park, new bridge construction or a shopping centre.

PTFE is an ideal material for the job because of its low coefficient of friction. PTFE slide bearings successfully address the problems of movement brought about by outside factors, including:

• Changes in temperature
• Strong winds
• Seismic shifts
• Thermal expansion in construction materials

What do slide bearings look like?

There are two elements to each PTFE slide bearing: the upper and lower element work by sliding against each other.

The upper element is typically the largest of the two - the difference in size being equal to the amount of anticipated movement for any given structure. As a result, the lower element always received a uniform load which provides stability.

There’s no such thing as a ‘typical’ or ‘off the shelf’ slide bearing. This critical point is often overlooked until the bearings are needed urgently on-site. Here’s an example of one below.

You can see other sample PTFE slide bearing configurations which will give you more of an idea as to how they’re put together. 

When are they needed and why?

In an ideal world, getting specifications and quotes for slide bearings would be done by the architect of a project before construction had begun.

However, in reality it’s typically left until the critical stage where someone in a construction firm notices they’re required on-site, but has no idea as to the required configuration, cost or lead-time.

There are a number of reasons why slide bearings shouldn’t be an afterthought, including costly delays to projects.

Whose job is it anyway?

In our considerable experience of designing and manufacturing slide bearings for projects all over the world, the ordering of these vital construction components doesn’t seem to fall on anyone’s shoulders until the very last minute.

We understand that as an architect, you may not consider the configuration, sourcing and pricing of slide bearings to be part of your role. However, there are some compelling reasons why you may want to take a more active role:

• Save your clients time and money
• Go the extra mile for your clients
• Boost your reputation
• Peace of mind that comes with knowing you’ve covered all bases

We often get panicked calls from people on-site looking for PTFE slide bearings the next day. Our typical lead time is 7 days so not having these available can cause real headaches all round.

5 things to consider

Here are five main points to think about when it comes to PTFE slide bearings.

• They can be fixed to the installation in a number of different ways: bolting, full welding, tack welding and mortar embedment.
• You need to choose the correct slide bearing configuration to match the installation method.
• PTFE bearings need to be handled carefully and protected to keep the contact surfaces clean and debris-free.
• The overall load of the structure needs to be calculated so we can ascertain the total area required at the relevant temperatures and pressures.
• You don’t need to be a technical expert to source the right slide bearings for your project. Give us a call and we’ll talk through it with you.

Don’t let slide bearings slip through the net on the construction projects you’re involved with. We can ensure they’re properly specced out and part of the plans that are used from the beginning, thereby avoiding unnecessary delays and costs.

Linear bearing slides, or linear rail slides, are a type of linear motion system that uses specialty ball bearings to glide smoothly along a set track inside a rail. They are essential in CNC machines and 3D printers to consistently deliver low-friction linear movement. 

Linear bearing slides differ from other machine slides due to their bearings, which enable superior precision and smoothness. These machine slides are suitable for many applications requiring tight tolerances.

Determining whether linear bearing slides are the best option for your facility or your customers depends on factors like application requirements, cost, and environmental conditions. We’ll help you consider the pros and cons of linear bearing slides to get the maximum return on your investment.

Contact Us

Design of Linear Bearing Slides

Design is key to getting the smooth, precise movement that makes linear bearing slides effective. Linear bearings are usually made of a moving carriage and a stationary rail. Here’s a breakdown of linear bearing components:

If you want to learn more, please visit our website Sliding Bearing.

• Carriage: The carriage holds the load and slides along the rail. It takes the load from one point on the rail to another precisely. 
• Rolling element: The rolling element, like specialty ball bearings or rollers, moves along the rail, minimizing friction as the carriage carries the load. The slides’ rolling elements are held inside a recirculating track, which keeps them in place as they move. 
• Rail: The rail is what the carriage and rolling elements slide along. Rails are usually made from steel or aluminum, ensuring they remain durable and strong through repeat uses. 

Types of Linear Slides

Beyond linear bearing slides, other types of linear slides include:

• Dovetail slides:Dovetail slides consist of two flat, smooth surfaces that glide against each other. They have a high load capacity and are a cost-effective solution for light and medium-duty precision applications.
• Hardened-way slides:Hardened-way slides are exceedingly durable. While they generate more friction and operate at a lower speed than alternative slide types, they are wear-resistant and maintain accuracy under heavy loads.

Common Applications for Linear Bearing Slides

With lasting efficiency and durability, linear bearings are a great choice for various applications. Their quality and consistency produce reliable results with minimal maintenance needs. Some applications for linear bearing slides include:

• CNC machining: Linear bearing slides ensure precise control over intricate tasks like drilling, cutting, and milling. Their stability helps support better machine part quality, providing essential support for high-precision components.
• Automation and robotics: Linear bearings are also critical in automation and robotics. Conveyor systems, robotic arms, and automated assembly lines all use linear bearings to get controlled, precise movements. 
• Material handling: Material handling and packaging are two industries using linear bearing slides. Labeling machines, packing lines, and material handling systems all need precise positioning and movement to complete their work efficiently. 

Benefits of Linear Bearing Slides

Linear slides can be advantageous for OEMs aiming to deliver high-quality products to their customers consistently. By offering precise and reliable results, linear bearings can give a business the edge it’s looking for. The benefits of linear bearing slides include:

1. Excellent Durability 

Steel and aluminum materials and advanced engineering give linear bearing slides durability and longevity. Linear bearings can easily withstand heavy loads and continuous use while still rolling with minimal friction. Getting units with features like seals and wipers further protects the life of an operation’s linear bearings. These features stop dust and debris from entering internal components, reducing wear and damage.

2. High Precision and Accuracy

Linear bearing slides are popular thanks to their precise and accurate movements. The low-friction ball bearing design keeps the carriage moving smoothly along the rail, increasing accuracy by minimizing backlash or play. Movement is predictable and consistent when production lines feature linear slides. This level of accuracy is essential in preventing minor deviations, which can potentially cause significant errors in manufacturing work. 

3. Increased Efficiency 

The linear bearing’s precise, low-friction movement enhances the equipment’s efficiency, allowing machines to operate faster and more accurately. Their ability to help machines operate faster contributes to cost savings and higher profit margins.

Additionally, linear slides typically use less energy than alternative linear motion systems such as pneumatic or hydraulic actuators. Increased energy efficiency contributes to cost savings and reduces a company’s environmental impact. 

4. Reduced Maintenance

With low-maintenance materials and protective features, linear bearing slides need minimal maintenance. The ball bearings just need regular lubrication to ensure a frictionless operation. With seals protecting internal components from dust and the linear bearing components’ durable materials, facilities can get to work with limited maintenance tasks. Less maintenance means less downtime and maximum productivity.

5. Greater Stability

OEMs and end-users can rely on high-quality linear bearing slides to maintain stability while carrying substantial loads. Because of this reliability and strength, linear slides are often part of heavy-duty machines such as material handling and industrial automation systems. 

The stability of linear bearings as they slide gives facilities a better-quality product. With stability and precision, manufacturers can reduce the need for rework and increase their overall throughput. 

6. Quiet, Smooth Operation

Linear rail slides featuring roller or ball bearings operate smoothly and quietly. Because of their quieter operation, linear slides are ideal in facilities where noise is a concern.

7. Versatility and Customization

Companies can order linear slides in various materials, configurations, and sizes, using interchangeable devices to restore predictable movement after replacements. This versatility makes linear slides easy to tailor to fit precise needs. Customization is especially vital in applications involving research, development, niche product manufacturing, and prototyping. 

8. Resistance to Deformation

High-quality linear bearing slides have excellent deformation resistance. Their sturdy, rigid construction enables them to maintain their shape even in highly demanding conditions, so they can deliver consistent, reliable performance.

9. Easy Installation and Integration

Standardized interfaces and mounting patterns make linear slides easy to install in existing systems. Companies can save time when integrating a linear rail.

10. Enhanced Safety

Manufacturers can equip linear slides with safety features such as sensors and limit switches. These features — combined with a linear slide system’s controlled, predictable movement — increase operational safety.

Cons of Linear Bearing Slides

While linear bearings are effective components, they do have some downsides. Consider these cons with the advantages:

1. Higher upfront cost: Linear bearing slides typically cost more than alternative linear motion systems. However, their high-quality design, durability, and dependable operation make them worthwhile investments for manufacturing applications.
2. Sensitivity: Linear bearings can be sensitive to debris, dust, and dirt contamination. They need proper sealing and maintenance to prevent friction-causing contamination. Manufacturers may need to choose a different option if the environment has significant contamination concerns. 
3. Risk of bearings falling out: Ball bearings can fall out when a worker or maintenance technician disassembles a linear rail slide system. However, damage is avoidable if they carefully follow the system’s disassembly instructions and prepare to support the bearings.
4. Potentially limited travel distance: If a linear bearing slide’s rolling components do not recirculate, the rolling element row’s length determines the system’s travel distance. However, modern linear rail slide systems typically feature recirculating rolling elements that extend the travel distance to the rail’s full length.

Common Maintenance for Linear Bearing Slides

Maintenance is essential for protecting linear bearing slides. Skipping maintenance means potentially compromising equipment, leading to downtime and significant expenses. Linear bearing maintenance includes:

1. Regular lubrication: Lubrication is essential for reducing friction and wear. Most linear bearing slides need regular lubrication to keep everything running smoothly. Technicians should consult the manufacturer’s recommendations for lubrication type and frequency. 
2. Bearing replacements: Bearings can wear out over time, particularly if operated with excessive loads. Management can establish a bearing replacement schedule to prevent bearings from giving out and causing downtime. Manufacturers can also add bearing units to increase load capacity and protect the slide from wear under heavy loads.
3. Operator training: Proper training is critical for operating equipment with linear bearing slides. Ensure operators know the signs of potential issues to catch problems early. Facilities will reduce the chances of downtime and equipment damage with a well-trained team. 
4. Inspections: Regular inspections ensure equipment is performing well. Employees should often look for wear, misalignment, and contamination. If inspections reveal any problems, replace the problem parts immediately to avoid further issues. 

Upgrade Operational Precision With Setco Linear Bearing Slides

Upgrading your machines or products with linear bearing slides is a significant decision. Partner with Setco, a leader in the machine-building business with over 100 years of experience, to install reliable, high-quality slides and feel confident in your decision.

We offer six standard sizes of Linear Bearing Low (LBL) low-profile rail slides, meticulously manufactured to OEM specifications. With high rigidity and stability, our slides are perfect for heavy loads and high positioning speeds. If you have specialized applications requiring unique components, we can custom-engineer solutions to meet your needs.

At Setco, we offer more than linear bearing slides. Our comprehensive rebuild and repair services for spindles, milling heads, and slides ensure equipment operates at peak performance. Setco’s spindle repair service is globally recognized for its precision and dependability. Choose us to maintain CNC machinery and experience the benefits of long-lasting quality. 

For more Deep Groove Ball Bearings minformation, please contact us. We will provide professional answers.